Skip to content

Free quotes and a return visit once we install

(972) 962-9846
(972) 962-9846

ServicesStorm Doors

Storm Door Installation in Murphy

We install storm doors that fit your opening square, close without slamming and seal along the sweep. You choose the glass, screen and frame style, and we mount it to your trim. After it has been in use a while, we check back on the closer and latch.

Installer kneeling on a front porch, using a cordless drill to fasten the hinge side of a new white storm door on a brick house, tool bag and ladder nearby

Why a second door in front of your entry pays off

Mounted on the outside of your main entry, a storm door is a lighter second door with its own glass and, on many models, a screen. The glass stops wind-driven rain before it reaches your front door, and the screen lets breezes in while keeping bugs out. It also absorbs the sun and grit that would otherwise wear down the paint and weatherstripping on the door behind it.

The details decide whether it works. The frame has to be fastened to solid brick mould or trim, the Z-bar expander along the hinge side has to be cut to the real height of your opening, and the bottom expander has to drop until its vinyl sweep touches the threshold. Skip any of those and you get a door that rattles, drags or lets light through underneath.

One caution we explain at every visit: full glass in front of a dark, south- or west-facing entry door can trap a lot of heat in a North Texas summer. That can blister paint or warp a door slab. We look at your door's material and exposure, then recommend a ventilating design or Low-E glass where it fits.

What the installation includes

Measuring the real opening
We measure the width at the top, middle and bottom, plus the height on both sides. Older openings are rarely square, and those numbers tell us how much the expanders need to take up.
Choosing the door style
Full-view glass, a mid-view with a fixed lower panel, a retractable screen that rolls into the frame, or interchangeable glass and screen panels you swap by season. We explain what each one means for light, airflow and heat.
Frame mounting and expanders
The hinge rail and Z-bar are screwed into the trim, then the latch-side and bottom expanders are fitted. We check the reveal so the door swings clear of your entry door hardware.
Closer, latch and wind chain
We set the pneumatic closer's speed and hold-open washer, install the handle set and deadbolt if your model has one, and mount a wind chain or built-in stop so a gust cannot bend the hinge.
Cleanup and haul-away
We remove the old storm door if you have one, sweep the porch and take the packaging and old unit with us.
Care walkthrough and follow-up
Before we leave, we show you how to adjust the closer and swap panels. Later we check back on how the door is closing, because closers and sweeps often need a small tweak once they have cycled through some use.

Signs it is time for a new storm door

  • Banging shut or stopping short

    When the pneumatic closer wears out, or the frame has racked out of square, the door either bangs into the jamb or never catches the strike. Once the frame is twisted, adjusting the closer rarely fixes it for long.

  • Light shows under the sweep

    If you can see daylight at the bottom, the sweep is gone or the bottom expander has slipped. Rain and insects come through the same gap.

  • Dented or bent frame

    Hail and wind catching an open door can bend an aluminum frame or tear the hinge rail from the trim. A bent frame keeps the glass under stress and the seals out of contact.

  • Your entry door finish is failing

    Peeling paint or a faded stain on the main door can mean the storm door is trapping heat or not shielding it at all. Either way, a different design is worth a look.

  • No storm door at all

    If your entry door takes the weather head-on, a storm door adds a barrier, a screen for spring and fall airflow, and protection for the door you already paid for.

What sets the price of a storm door

Two things drive the number: the model you choose and the condition of the trim around your door. The written quote gives every part of the job its own line, so no cost is buried in a single total. You can also choose $0 Down on the whole project and 0% Financing options.

Style and glass

Basic mid-view doors cost less than full-view or retractable-screen models. Choosing Low-E or decorative glass adds more.

How the frame is built

Thick extruded aluminum frames hold their shape better than thin roll-formed ones, and they cost more for it.

Locks, closers and finishes

One closer and a plain handle are the lower-cost setup. Two closers, a keyed deadbolt or a premium finish raise it.

State of the surrounding trim

Brick mould that is split or rotted will not hold the frame screws, so it needs attention before the door is hung. We point this out at the consultation instead of on install day.

Your storm door job, step by step

  1. 1

    No-cost visit to your home

    At your house we measure the opening, check the trim and the main door behind it, and go over styles with you. The written quote breaks out each line item, and nothing gets tacked on afterward.

  2. 2

    Placing the order

    We order the color, glass and size you chose. Most storm doors are made in standard widths and use expanders to fit the opening, so custom builds are rare.

  3. 3

    The day we install

    One storm door generally takes a portion of a day. We cover the porch, take down the old door, fasten and shim the frame, then hang the new one and adjust it until it shuts and latches cleanly.

  4. 4

    Walkthrough and return check

    We show you how to adjust the closer, swap panels and clean the tracks, then come back later to confirm the door still closes as it did the first day.

Window technician kneels beside a homeowner, pointing at a window on the side of a brick house, with a ladder, drill, caulk gun and tool bag on the lawn

Questions about storm doors

Will a storm door damage my front door's finish?

It can if the pairing is wrong. A solid glass panel in front of a dark door that gets strong afternoon sun can trap enough heat between them to blister the paint or warp the slab. We check your entry's exposure and the door material, then recommend a ventilating model or Low-E glass when needed.

Does the storm door come with a warranty?

Yes. Each storm door we install has a limited lifetime warranty on labor and product, and if you sell your home it passes to the buyer.

Who pays if something is damaged during the work?

We are fully insured, so your entry is covered for as long as our crew is working there. Before the old door comes down, we also cover the porch.

How much maintenance does a storm door need?

Not much. Wipe down the glass and the screen tracks, brush grit off the sweep a few times each year, and snug up the closer bracket screws if they work loose. We demonstrate each step at the walkthrough and look at them again on our follow-up.

Can you replace my entry door on the same job?

Yes. If the main door is worn out, we can price it through our entry doors service and install the two together, so the storm door fits the new frame.

Two-story tan brick house with new black-framed windows still bearing stickers, a stepladder, boxes and a drill by the front porch and shrubs

Get the right storm door for your entry

We will measure your opening, check your entry door and trim, and give you a written quote. We work in Murphy and nearby towns like Wylie, Sachse and Plano.