Window Replacement in Murphy, With a Return Visit Built In
We replace drafty, fogged and hard-to-open windows in Murphy and nearby Wylie and Plano, and we install entry doors, patio doors and storm doors. Your quote is free and broken out line by line. Once the job is done, we come back to check how everything seals and operates, then show you how to care for it.
- Free in-person consultations
- $0 down on the project
- Return visit to recheck
- Line-item written quotes

Windows First, Plus the Doors That Seal Your Home
Window replacement is most of our work: we remove failed units, prepare the opening and set new windows with flashing, insulating foam and exterior sealant. We also install entry doors, patio doors and storm doors, because a new set of windows does little if the front door leaks air at the threshold. Each service page explains the materials, the install steps and what changes the price.

Window Replacement
New windows measured to each opening, set plumb, flashed and sealed, with a return visit to check the work and show you how to care for it.

Entry Doors
New fiberglass and steel entry doors installed as complete prehung units, with flashing under the sill and a check-back visit after the door settles in.

Patio Doors
Sliding, French and hinged patio doors set on a flashed sill, sealed against drafts and checked after install so they keep gliding.

Storm Doors
New storm doors with full-view glass, retractable screens or interchangeable panels, fitted to your entry frame and adjusted after install.
How a Project Runs, Start to Check-Back
Here is what happens from the first phone call to the follow-up visit.
- 1
Phone call and consultation
Describe the problem in plain terms: a fogged pane, a slider that sticks, a front door that won't latch. We then book a free in-person consultation at your home at a time that suits you.
- 2
Measure, inspect and quote
We measure each opening, check sills and frames for rot or racking, and talk through materials and glass. You get a written, itemized quote with no pressure to sign that day.
- 3
Order and install day
Units are built to your measurements. On install day we remove the old units, prepare and flash each opening, set and shim the new ones, insulate the gaps with low-expansion foam and seal the exterior. We test every sash and lock before we leave.
- 4
Return visit and care walk-through
We come back to recheck operation and sealant, make any small adjustments, and show you the weep holes, tracks and hardware you will want to keep clean.

What Drives the Price of New Windows and Doors
No two homes have the same openings, so no two quotes match. These are the factors that move the total most on a window or door project.
During a free in-person consultation we measure each opening, then give you a written quote with every line broken out. To pay over time, choose $0 Down on the whole project or one of our 0% Financing options.
- Frame material
- Most homeowners go with vinyl, which needs almost no upkeep. Fiberglass and composite cost more, but they shift less in the heat and hold their shape on large units.
- Glass package
- We usually start with double-pane glass, argon fill and a low-E coating on one pane. A low solar heat gain coating blocks more summer sun on south and west walls, while laminated or triple-pane glass costs more for added quiet or security.
- Install method
- Inserts take less labor. Full-frame installs cost more, but they let us replace a rotted sill, add a sill pan and flash the opening correctly.
- Shape, size and access
- Picture windows, arched tops and unusual shapes are made to order. Second-story openings above a roof or garden beds take longer to set up.
- Condition of the current opening
- Stains under the sill, soft wood or an out-of-square frame add repair and shimming. The clay soil in North Texas moves season to season and often twists door frames, so we check every opening for square before we quote it.
- Door hardware and options
- On doors, the price shifts with multipoint locks, decorative glass, sidelites, retractable screens and your choice of finish.
Where We Install
Our crews work out of Murphy, TX, and cover the cities that border it and a little beyond. That list includes Wylie, Sachse, Parker, Plano, Garland, Richardson, Allen, Rowlett, Fairview and Lucas.
- Murphy
- Wylie
- Sachse
- Parker
- Plano
- Garland
- Richardson
- Allen
- Rowlett
- Fairview
- Lucas
If you live near any of these towns and are not sure we cover your street, ask when you call. The Service Areas page lists each town we serve.
Our Work Before, On and After Install Day
Plenty of installers leave the moment the caulk is in. We book a second trip, because some problems only show up after a new window or door has lived through a few weeks of heat and daily use.
- 01
We come back after the job
After the sealant cures, we return to look at every unit we installed. We check that each sash locks fully, each door latches without a push, and the exterior sealant still holds tight against brick and trim. If a reveal is uneven or a strike plate is a hair off, we adjust it right then.
- 02
Care you can actually keep up with
During that visit we walk you through the simple upkeep. Clear the weep holes at the bottom of each frame so water can drain, vacuum the grit out of sliding tracks, and use silicone spray on rollers and hinges instead of oil, which collects dust.
- 03
A quote broken out line by line
Each opening appears on the quote with its frame material, glass package, install method and any trim or sill work. Every piece has its own price, so you can drop or change items before you agree to anything.
- 04
An honest answer on insert versus full-frame
An insert sits within the frame you already have, so the indoor trim stays put. Full-frame work strips the opening to the studs and header, which lets us inspect the wood and flash it correctly. We pull a little trim or probe the sill, show you what we find and recommend the method each opening really needs.
- 05
Your home treated with care
We lay drop cloths along our route, cover furniture near each opening and vacuum each room before we move to the next. When the day ends, the old windows and doors go with us.

A Window and Door Installer That Comes Back
Window Replacement Murphy installs replacement windows and new entry, patio and storm doors for homeowners in Murphy and the towns around it. We keep the service list short on purpose so every crew knows these products and their install details well.
We built our process around the follow-up because of what we kept seeing on other jobs: sealant that split at a brick joint, a slider that dragged once the rollers settled, a door that stopped latching following a hot month. Those are small fixes when someone catches them early. So we plan the return visit from the first day and leave you knowing how to keep your new windows and doors working.
- Insurance
- Fully insured
- Warranty
- Limited lifetime warranty on labor and product, transferable to next owner
Questions We Hear From Murphy Homeowners
How can I tell my windows need replacing?
Fog or moisture sealed between the panes means the insulated glass seal has failed and its gas has escaped. Other signs: sashes that won't stay up, frames that feel hot or cold to the touch, a draft at the meeting rail, and frames that are warped or cracked. Older aluminum frames pass outdoor heat straight indoors, which is reason enough for many homeowners to replace them.
What happens on your return visit?
Once the sealant has cured, we come back and check each unit we installed. We open and lock every sash and door, look for gaps in the exterior sealant and adjust any hardware that has shifted. We also show you how to clean the weep holes and tracks and which lubricant to use.
How long will the installation take?
For a house with a typical number of windows, plan on one to two days. Full-frame units and openings that need sill repair add time. We include an estimated schedule with your quote.
Do you warranty your work?
Yes. All windows and doors we install come with a limited lifetime warranty on labor and product, and it transfers to the buyer if you sell. We explain what it covers when we review your quote.
Is financing available?
Yes. We offer $0 Down on the whole project along with 0% Financing options, and we explain both at your free consultation.
Will I need a permit?
It depends on your city and the scope of the work. Resizing an opening is more likely to need one than a same-size swap. We check the requirements for your address and pull the permit ourselves when one is needed.
Will a storm door work with my front door?
Usually, though not always. Full glass over a dark door that takes strong afternoon sun can trap enough heat to damage its finish or weatherstripping. We look at the door and its sun exposure before recommending a storm door or a ventilating style.

Start With a Free Quote
Tell us about the foggy glass, the sticking slider or the front door that won't latch, and we'll book a free in-person consultation at your home. We measure every opening, give you an itemized quote and explain honestly whether an insert or full-frame install is the better fit.